News

Huawei Q6 WiFi Router launched with a socket along with Harmony OS 3.0

Huawei Q6 Wifi Router

Some say that no matter how good the signal is, it cannot reach the three walls. For many users, it is a true portrayal.

Generally speaking, for small units below 90 square meters, a single route with a better basic signal can be fully covered. However, for some complex or large units exceeding 120 square meters, it is difficult to cope with the traditional single route, and some rooms will inevitably have signal dead spots. Not to mention the large flats and villas.

In addition, the performance of the same router under different house types is also very different. For example, some units are relatively square, the living room is in the center, the placement distance between each room and the router is relatively average, and the signal coverage is relatively good at this time. However, if the apartment type is relatively different and the distance between the room and the routing location is large, it is difficult to achieve complete signal coverage.

Huawei Q6 Wifi Router Japan
Huawei Q6 Wifi Router

At this time, networking between different routes is needed to deal with it. At present, the whole-house WiFi based on multiple routers mainly includes three methods: wireless mesh networking, power line networking, and network cable networking, each of which has advantages and disadvantages.

Among them, the wireless mesh networking solution is relatively simple, but the signal attenuation of the sub-route is serious, and the signal capability of the sub-route is always worse than that of the main route, especially when passing through a concrete wall and across floors, the signal attenuation is more serious. Wireless Mesh networking is not a perfect solution for users who just need a signal.

Also Read:

Honor Tablet 8 Hands-On Review: Better than MI PAD 5

The stability of the network cable network is the best, but it requires POE routing + panel AP set, and the network cable interface needs to be embedded in the whole house, which is expensive and not conducive to later expansion.

The PLC power line networking is the simplest and the lowest cost, and it is the most direct solution to solve the WiFi coverage effect of the whole house in a large apartment. And it can be installed after; no need to pre-embed network cables.

Therefore, as a representative product of PLC power line networking, Huawei Q series routers have become very popular after their launch. The previous generation of Huawei routers, Q2 Pro, has become the first choice for many large-scale home users.

Huawei’s new generation of parent-child router, Huawei router Q6, is officially on sale. Its biggest feature is that it can change the wire into a network cable, and there is WiFi when there is electricity. One main route can drag up to 15 sub-routes, which can be applied to most households.

And compared with the previous generation Huawei router Q2 Pro, the Huawei Q6 Wifi router mainly has the following major upgrades.

Huawei Q6 Wifi Router with no socket now available for just $377

Features Huawei Q6 Wifi Router

First of all, compared with the theoretical rate of WiFi 5 1200Mbps of Q2 Pro, this time, Huawei router Q6 has been upgraded to WiFi 6 + 3000Mbps, and the addition of 4 high-power signal amplifiers makes the signal coverage of a single router stronger. . In addition, WiFi 6+ has a large bandwidth of 160MHz, which is twice as fast as WiFi 6 devices with a bandwidth of 80MHz. It can also automatically match a better frequency band so that the WiFi connection is stable and not easy to drop.

Based on the technology of PLC power line networking, Huawei router Q6 can realize a parent router with up to 15 sub-routers, whether you are a large flat, a villa, a duplex building, or a variety of unimaginable complex rooms, as long as there are sockets where the signal coverage can be achieved.

Huawei Q6 Wifi Router United States
Huawei Q6 Wifi Router

Secondly, it was upgraded to the new power line transmission technology PLC Turbo 2.0, and MIMO (multiple transmission and multiple receptions) was introduced. The theoretical rate is as high as 1.3Gbps. The previous generation Q2 Pro was only 600Mbps, which was more than doubled directly. In addition, Huawei Routing Q6 also has AI anti-interference technology, which can intelligently learn environmental interference sources and eliminate interference to the greatest extent.

An obvious disadvantage of many PLC routing in the past is that they will be interfered with by electrical appliances. The actual speed experienced is lower than the user bandwidth and unstable, and the signal will have signal attenuation, manifested as unstable network speed and easy disconnection and disconnection. For example, when you are playing a mobile game, someone at home is using high-power electrical appliances, which will cause the network signal transmitted by the power line to be attenuated, thus affecting the family members’ online experience.

AI noise reduction

Huawei Routing Q6 supports AI noise reduction and multi-channel concurrency + enhanced anti-attenuation technology, which greatly improves signal transmission performance and guarantees stability. It is understood that Huawei’s routing R&D team and Tsinghua University Power Line Laboratory researched the CNN neural network AI algorithm and applied it in Huawei’s routing Q6 for the first time.

Learning noise characteristics and optimal de-noising parameters through big data and AI can effectively filter out power line environmental noise, block noise, and achieve purer signal transmission.

In addition, because of the problem that some air switches with leakage protectors will bring great attenuation to the PLC signal, the PLC module of Huawei router Q6 supports multi-channel concurrency and performs dual-channel integration enhancement (double-channel combination enhancement) for the signal received at the strong attenuation place. Luhuiji anti-attenuation technology), which can effectively resist the attenuation caused by the air switch and bring better home PLC coverage performance.

Huawei Q6 Wifi Router UAE
Huawei Q6 Wifi Router

Moreover, Huawei Routing Q6 also supports HarmonyOS Mesh+, high-speed and stable networking, and has two functional features of multi-link super networking and super seamless roaming.

In simple terms, multi-link super networking refers to the simultaneous networking between the parent and child routers through three high-speed channels: power line, 2.4GHz WiFi, and 5GHz WiFi, which greatly improves medium and long-distance coverage and performance, and easily copes with multi-wall obstacles.

Super seamless roaming has 9 built-in technologies to optimize the roaming experience so that terminal devices such as mobile phones can switch between WiFi networks more smoothly without causing common problems such as freezes and interruptions.

Must read:

Huawei PixLab V1 Full color printer launched with Harmony OS 3.0

In addition, Huawei Q6 Wifi Router also supports children’s online protection. Parents can set restrictions on children’s games, payments, social networking, and other functions through Huawei Smart Life APP settings. To avoid the negative impact of bad websites on children, let children be in a safe network environment since childhood.

Suppose you are still looking for a whole-house WiFi coverage solution. In that case, the Huawei Q6 Wifi Router, which can convert wires into network cables, plug, and play, has high-speed and wide coverage, efficient and stable networking, and is suitable for a variety of house types, is undoubtedly the best solution.

Huawei Q6 Wifi Router with no socket now available for just $377

Leave a Reply

Your email address will not be published.