Buy Flsun SR FDM Pre-assembled 3D Printer For Just $479.99 (Coupon Deal)

The 3D printing company FLSUN launched its latest 3D printer, the “Super Racer”, in April. The FLSUN Super Racer promises a printing speed of up to 200 mm / s, it is operated by a dual-drive Bowden extruder and supported by a Volcano hot end. The Flsun SR is one of the largest delta printers. Typically, these printers do not have the largest work surface but can offer greater print heights. With Ø260 x 330 mm, it offers quite a lot of volume considering its mechanical layout and price range. Delta printers are rare and with a print volume like SR, you can usually find them for twice the price.

Coupon Code: 63USUNPR
Ship From EU Warehouse

Flsun would be silly to call a printer “Super Racer” if it did not offer an impressive print speed. Flsun says the default SR print speed is 150mm / s, but you can print as high as 200mm / s if you want. For comparison, Flsun’s Q5 runs at 30-100 mm / s. What does this mean for print quality? In general, delta printers can print at higher speeds than “typical” Cartesian devices due to their mechanical layout and less moving mass. The Flsun SR comes with a small touchscreen that can be magnet attached to the printer frame. You can take it off and move it around; it remains attached to the SR by one of those twisted elastic cords you could see attached to the dashboard of a 1980s police car.

Also Read: Buy Mijia Bluetooth Thermometer Hygrometer 2 (4Pcs) (Coupon Deal)

At 3.5 inches, it’s not the largest touchscreen; but a cord and the ability to move it around might be useful for some people. The heated platform on the Flsun SR combines two notable features: it is made of tempered glass and it is removable. A textured surface is probably the best option as it provides a firm adhesion; without the need for glue and allows prints to be peeled off just as easily once they cool down. It also allows for aesthetic first layers. Once in place, the platform can heat up to 100 ° C, which is enough for most filaments you’ll be using in a printer like this one.

One more thing to mention is that the platform has automatic leveling. That’s nice – even less worry about shifting. Since the Flsun SR can achieve high printing speeds, it is probably reasonable that Flsun decided to equip the machine with a hot-end volcano. It should ensure fast and efficient melting of the filament and provide enough molten filament for potentially high SR printing speeds. Such a hot end also allows you to experiment with different nozzle sizes and flow rates, so it gives creators the opportunity to be more creative and innovative in their hobby of 3D printing.

Also Read: Buy Artillery Sidewinder X2 3D Printer (Coupon Deal)

 Flsun SR

The Flsun SR is equipped with a Bowden type two-drive extrude; which should allow for a stable and reliable flow of filament to the hot-end. Bowden-type extruders sometimes have a problem with no jamming of flexible filament feeding; but the dual drive should alleviate some of these problems as it ensures even feeding. Yes! No racer would be complete without a bit of carbon fiber, and in the Flsun SR; they can be found in the parallel arms supporting the printhead. Carbon fiber is a very strong, ultra-light material that should make the already light printhead even lighter. With less mass to move, higher speed operation becomes less susceptible to print artifacts. Two other features are worth mentioning briefly. The first is that this printer has a filament sensor and resume printing function.

You can find this amazing Flsun SR FDM Pre-assembled 3D Printer on at a price of $479.99 with an incredible discount.

Coupon Code: 63USUNPR
Ship From EU Warehouse

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button