FULCRUM MINIBOT 1.0 3D printer available at $129.99
3D printers are becoming more affordable. Before us is one of the most interesting budget models of 2020 – the FULCRUM MINIBOT 1.0, a FDM 3D printer for printing at home, in the office and in the workshop. FULCRUM has gained user recognition for its low-cost FDM printers.
Table of Contents
FULCRUM MINIBOT 1.0 Specifications:
| Brand: FULCRUM Model: MINIBOT 1.0 Type: Complete Machine Material (Frames): ABS Platform board: Aluminum Alloy Engraving Accuracy: ± 0.1mm Nozzle quantity: Single Nozzle diameter: 0.4mm Nozzle temperature: 0 to 260 degree Layer thickness: 0.1-0.4mm Memory card offline print: TF card LCD Screen: Yes Print speed: <100mm/s, the normal print speed 30 ~ 60MM/S Supporting material: PLA Material diameter: 1.75mm Language: Chinese,English,French,German,Japanese,Russian,Spanish |
About the printer
Launched this spring, FULCRUM MINIBOT 1.0 was no exception. This is an affordable and reliable solution, with the quality of prints at the level of 3D printers worth hundreds of dollars.
Options and device
The FULCRUM MINIBOT 1.0 3D printer comes fully assembled. The kit, in addition to the device, includes a probe with resin, protective equipment – gloves and a mask, disposable funnels for cleaning the resin, a replacement film for the bath, a set of keys and a plastic spatula.
You can control the device using the touch screen. On the right panel, at the bottom, there is a power button and a USB connector for a flash drive.
Software, materials and printing
Before starting work, it is necessary to perform calibration in manual mode. This procedure takes 5-7 minutes. You will need to recalibrate if you encounter printing problems.
The manufacturer recommends monitoring the cleanliness of the LCD screen and the PTFE film at the bottom of the bath. Dust should be removed carefully so as not to damage the surface – use a cloth dampened with isopropyl alcohol.
Preparation of the model is carried out using a slicer, which can be installed from a complete flash drive or downloaded on the official website of the company.
The finished model is saved in the FULCRUM MINIBOT 1.0 internal format, and printing is carried out directly from the TF flash drive.
If you are a beginner 3D printer, then a working volume of 75x70x70 millimeters will be enough, for most everyday tasks more is not needed.
Verdict
Affordable price, ease of operation and maintenance, high-quality prints – FULCRUM MINIBOT 1.0 is one of the best solutions in the market where photopolymer printers cost hundreds of thousands of dollars.
But 3D printing enthusiasts who would like to learn the basics of photopolymer printing and use this printer in everyday life are unlikely to find anything more interesting.
Where to buy FULCRUM MINIBOT 1.0 3D printer?
Product is shipped from the Chinese warehouse of Gearbest, remember to select priority direct mail in order to have international tax free shipping. You can also check local warehouses offers, available directly on the product page!
Similar Product:
[yasr_overall_rating]
